Find a product
Low Pressure Brass Swivel Joint
Swivel Joints in Brass, specifically designed for our range of water guns, but suitable or any low pressure application.
Brass body
Brass body, chrome plated
| Part Number | Thread Bspp |
Thread Bspp |
Bore in mm |
|---|---|---|---|
| SWM09-1/2 | 1/2" male | 1/2" female | 9 |
| SWM09-3/4 | 1/2" male | 3/4" female | 9 |
| SWM14-3/4 | 1/2" male | 3/4" female | 14 |
| SWM12-3/4 | 3/4" male | 3/4" female | 12 |
| SWM18-1 | 1" male | 1" female | 18 |
| SWM09-1/2M | 1/2" male | 1/2" male | 9 |
| SWM09-3/4M | 1/2" male | 3/4" male | 9 |
Brass body, chrome plated
| Part Number | Thread Bspp |
Thread Bspp |
Bore in mm |
|---|---|---|---|
| SWC09-1/2 | 1/2" male | 1/2" female | 9 |
| SWC09-3/4 | 1/2" male | 3/4" female | 9 |
| SWC14-3/4 | 1/2" male | 3/4" female | 14 |
Our brass Swivel Joints have the following features:-
- Brass body
- EPDM rubber seals
- Chrome plated balls
- 30 Bar max working pressure
- Very low torque requirement to rotate
- Will increase operator safety
- Will reduce operator fatigue levels
- Will increase hose life
- Maximum working temperature 95OC
- Can be installed retrospectively
Spare EPDM thread seals are available. These swivels are also available as a 1/2" male thread with a 1/2" diameter hosetail.
Particularly useful when purchasing any of our Hose Reels which come with a fixed male on the end of the hose. The use of these swivels will prolong the life of the hosereel, lowering costs. Lower operator fatigue and therefore increase productivity, as well as increasing safety as there is less chance of hose failure..
