Find a product
Camlock couplings or Cam and Groove are available in 4 materials and in 1/2"nb to 6"nb. Camlock adapters are also available, as are camlock spare seals etc.
Camlock couplings are simple, reliable and versatile, which is probably why they are the most widely used industrial quick couplings available today.
The female half of the coupling has arms with a cam profile. These engage in the groove of the male and, when turned, pull the two halves together, crushing the rubber seal which in turn, provides the leak proof joint.
Our camlock couplings are interchangeable with others manufactured to MIL-C-27487F.
We can offer camlock in all sizes, from 1/2" to 6" in materials Aluminium, Brass and Stainless Steel grade 316. In Polypropylene our camlock are only available up to 4" due to the limited structural rigidity of the material. Male and female threads, hosetails and flanges, as well as butt and socket weld ends are all available from stock or can be supplied on a very short lead time.
Intrico Products also offer camlock couplings with a wide range of safety and special features, such as locking arms. We can fabricate or offer a massive range of adapters in aluminium and stainless steel. Npt threaded camlock fittings are also available from stock. Some of these fittings are shown on the specials page of the website.
Adding to
the Camlock fitting versatility is the wide range of seals available from
stock. BunaNitrile is the standard material fitted to the metallic coupling
whilst EPDM is the standard in the polypropylene product. You can find a guide
to gasket material selection on the Camlock Seal page which can be found by clicking the link at the bottom of this page.